Annual Program - Cycle - Grasslin Talento Dialog Bedienungsanleitung

10.3 Annual program – Cycle
Example
Channel 1 is switched ON from January 15 to April 15 every hour for 10
minutes.
Start time Monday January 15, 9.00 a.m.
Duration 10 min.
Period 1 hour
End time Friday April 15, 07.00 p.m.
Starting the program
1. Start the program and select your timer (see chapter 3).
The main menu opens.
 Z
2. In the register, click on the button Annual Programs.
3. Select in the register the channel for which the annual program should be
created, e.g. CH1 = channel1.
It is possible to specify channels by double-clicking on the Channels tab.
Cycle programming
A
4. Select the switching command
5. Click with the left mouse button in the line for the channel 1 (CH1) on the field
09:00 a.m. to set the ON switching command and then in the field 07:00 p.m.
to set the OFF switching command.
The window "Pulse/Cycle Settings" opens.
 Z
6. Set the days, hours, minutes or seconds for the pulse duration.
7. Set the days, hours, minutes or seconds for the period and confirm your input
by clicking on OK.
The calendar opens.
 Z
118
.
2. 2.
3.
Abb. 47: Annual program - Cycle
4.
5.
6.
7.
Abb. 48: Annual program - Cycle 2
The pulse duration must be less than the period.
No nesting of cycle programs is allowed.