krispol STARCUS F35 Montageanleitung Seite 61

SETTINGS OF FUNCTION PARAMETERS IN MENU
3. —
MENU 3
3. -
Soft stop (during-
-operation) function
Soft Stop (during-operation) Function Setting
3.-
3. 1
Note:
Press and hold SET button for about 6 seconds
to enter main menu until "0.-" appears on the
display then release the button.
Press UP till "3.-" appears on the display.
Press SET into the Soft stop (during-operation)
function adjustment
The digital tube display
shing display (default).
Adjust the stalls from
UP/DOWN. This function is used to control the
soft stop and corresponding soft stop speed
during operation. Press the SET button to con-
firm the selection and automatically exit the
function menu.
The soft stop function is enabled
3. 1.
by default
vice or a remote control, the soft stop function
is implemented during operation.
3.0
means: Soft stop function is off
3.1 means soft-stop will low-down the speed to
30% in 0.75 second,then stop the door
3.2 means soft-stop will low-down the speed
to 40% in 0.75 second, then stop the door.
3.3 means soft-stop will low-down the speed
to 50% in 0.75 second, then stop the door.
3.4 means soft-stop will low-down the speed
to 60% in 0.75 second, then stop the door.
3. 1
Number 1 fla-
3.0 3.4
to
, Whether it is an external de-
by buttons
61