krispol STARCUS F35 Montageanleitung Seite 57

SETTINGS OF FUNCTION PARAMETERS IN MENU
1. 1
Reversal Distance
Ignorance Setting (Fine
adjustment of the pre-
-close limit position- for
DW)
1. 2
Fine adjustment of
the open limit position
1. 1 Press UP till "1.1" appears on the display.
Press SET to enter the Reversal Distance Igno-
rance Setting.
.8
The digital flashes
Adjust the stalls from
or DOWN, Press SET to confirm the function
option, automatically exit to the menu
continue setting the next function menu, or
press the RETURN button to exit the function
setting.
Note: According to the door rail system and the size
of the cable drum, the adjustment range of
each setting is between 20 mm -50 mm (Ba-
sed on the different cable drum installed).
.8
Default
The calculation format is like this:
[8] * 2* 2.2mm
Press and hold SET button for about 6 seconds
1. 2
to enter main menu until "0.-" appears on the
display then release the button.
Press UP till "1.-" appears on the display.
Press SET then "1.0" appears on the display.
Press UP till "1.2" appears on the display.
- 5
Press SET to enter, digital flashing display
Use the UP or DOWN buttons to adjust the
number displayed on the digital tube between
-F 0
...
press SET to confirm the function option, then
exit to the menu
function menu, or press the cancel button to
exit the function setting.
.8
.1
to
is about 35mm.
F
to Select the target parameter,
1.3
Continue to set the next
.F
by button UP
1.2
to
-5
,
57