Troubleshooting; Specifications - Reolink RLC-81MA Schnellstartanleitung

Troubleshooting

Camera is Not Powering On
If your camera is not powering on, please try the following solutions:
• Make sure your camera is powered properly. The PoE camera should be powered by a PoE switch/
injector, the Reolink NVR or a 12V power adapter.
• If the camera is connected to a PoE device as listed above, connect the camera to another PoE
port and see if the camera will power on.
• Try again with another Ethernet cable.
Picture is not Clear
If the picture from the camera is not clear, please try the following solutions:
• Check the camera lens for dirt, dust or spiderwebs, please clean the lens with a soft, clean cloth.
• Point the camera to a well-lit area, the lighting condition will affect the picture quality a lot.
• Upgrade the firmware of your camera to the latest version.
• Restore the camera to factory settings and check out again.
9 English
Spotlight is not On
If the spotlight on your camera is not on, please try the following solutions:
• Ensure the spotlight is enabled under Device Settings page via Reolink App/Client.
• Upgrade the firmware of your camera to the latest version.
• Restore the camera to factory settings and check out the spotlight light settings again.
Specifications
Hardware Features
Power: By PoE (802.3af)/DC 12V
Spotlight: 1pcs
Day/Night Mode: Auto Switchover
General
Operating Temperature: -10°C to 55°C (14°F to 131°F)
English 10