Maintenance, Cleaning And Recalibration - WIKA TC46 Betriebsanleitung

7. Maintenance, cleaning and recalibration

7. Maintenance, cleaning and recalibration
EN
7.1 Maintenance
This instrument is maintenance-free.
Repairs must only be carried out by the manufacturer.
Only use original parts.
7.2 Cleaning
1. Before cleaning, correctly disconnect the instrument from the process, switch it off
and disconnect it from the mains.
2. Use the requisite protective equipment.
3. Clean the instrument with a moist cloth.
Electrical connections must not come into contact with moisture!
4. Wash or clean the dismounted instrument, in order to protect persons and the
environment from exposure to residual media.
7.3 Recalibration
DKD/DAkkS certificate - official certificates:
We recommend that the instrument is regularly recalibrated by the manufacturer, with
time intervals of approx. 12 months.
12
For contact details, please see chapter 1 "General information" or the back
page of the operating instructions.
CAUTION!
Physical injuries and damage to property and the environment
Improper cleaning may lead to physical injuries and damage to property
and the environment. Residual media in the dismounted instrument can
result in a risk to personnel, the environment and equipment.
▶
Carry out the cleaning process as described below.
CAUTION!
Damage to the instrument
Improper cleaning may lead to damage to the instrument!
▶
Do not use any aggressive cleaning agents.
▶
Do not use any hard or pointed objects for cleaning.
WIKA operating instructions model TC46