Medisana 79000 Gebrauchsanweisung Seite 65

2. Press twice, "CtL" appears
in the display.
Press , to confirm.
3. Place the monitor on a level
surface, such as a table.
4. Unscrew the cap of the container
for the solution and wipe the tip
with a clean cloth.
NOTES
• Select the "CtL" setting, to
avoid recording the data with
the control solution in the
memory for blood glucose
readings.
• If or remain in the
display and no other entries are
made then the test results will
be saved in the memory with
or .
5 Operating
5. Press the container so that a tiny
droplet forms on the tip of the
container.
6. Place the drop onto the blood
sample area on the end of the test
strip.
7. Do not get any control solution on
the top of the test strip.
15