Enjoying Unprocessed Input Sources - Yamaha RXV463BL Bedienungsanleitung

■ Enjoying 2-channel sources using the
standard decoders
Signals input from 2-channel sources can also be played
back on multi-channels.
Press 4 AMP and then press OSUR. DECODE
repeatedly to select a decoder.
You can select from the following decoders depending on
the type of source you are playing and your personal
preference.
Decoder
Dolby Pro Logic processing for any
Pro Logic
sources
Dolby Pro Logic II processing for
PLII Movie
movie sources
Dolby Pro Logic II processing for
PLII Music
music sources
Dolby Pro Logic II processing for
PLII Game
game sources
■ Using sound field programs without
Virtual CINEMA DSP allows you to enjoy the CINEMA
DSP programs without surround speakers by creating
virtual speakers.
If you set "SUR. L/R SP" to "NONE" (see page 58),
Virtual CINEMA DSP is automatically activated
whenever you select a CINEMA DSP program
(see page 38).
Note
Functions
Virtual CINEMA DSP will not be activated even when
"SUR. L/R SP" is set to "NONE" (see page 58) in the following
cases:
■ Enjoying multi-channel sources and
SILENT CINEMA allows you to enjoy multi-channel
music or movie sound, including Dolby Digital and DTS
sources, through ordinary headphones. SILENT CINEMA
is automatically activated whenever you connect
headphones to the PHONES jack while listening to
CINEMA DSP sound field programs (except for 5ch
Stereo) (see page 38). When activated, the SILENT
CINEMA indicator lights up in the front panel display.

■ Enjoying unprocessed input sources

When this unit is in the "STRAIGHT" mode, multi-
channel sources are decoded straight into the appropriate
channels without any additional effect processing. 2-
channel stereo sources are output from only the front left
and right speakers.
Press M STRAIGHT (or press 4 AMP and then
press B STRAIGHT) to select "STRAIGHT".
To deactivate the "STRAIGHT" mode, press
M STRAIGHT (or press 4 AMP and then
B STRAIGHT) again so that "STRAIGHT" disappears
from the front panel display.
surround speakers
(Virtual CINEMA DSP)
– when "5ch Stereo" (see page 38) is selected.
– when headphones are connected to the PHONES jack.
sound field programs with headphones
(SILENT CINEMA)
(Straight decoding mode)
Sound field programs
39
En