Operation; Inserting/Replacing The Battery; Check Base Plate/Blade Guard - Parkside PTS 710 B2 Bedienungs- Und Sicherheitshinweise

˜ Operation
˜ Inserting/replacing the
battery
Open the battery compartment cover
a Phillips screwdriver.
If necessary, remove the used battery.
Insert a new 3 V button cell (type CR2032)
in accordance with the polarity shown. Screw
the lid of the battery compartment cover
back on.
m CAUTION!
If operating and adjustment equipment
u
is used or procedures other than those
specified here are carried out, this may
result in hazardous radiation exposure.
NOTE
The product is equipped with a power on/
u
control lamp , which lights up green as
5 ] [
soon as the product is connected to the
mains. This action indicates that the product
is live.
˜ Check base plate/blade guard
m WARNING! RISK OF INJURY!
Always remove the power plug from
the mains power socket before carrying
with
[ ]
out any work on the product.
Check the freedom of movement of the base
plate
[ 7 ]
[ ] Activate the safety lock-out
that position. Lower the circular saw. In this
way, you can test the function of the base
plate
7 ] [
and may not jam.
After letting go, it must be move smoothly
back to its starting position of its own accord.
before each use.
and keep it in
2 ] [
. The base plate must move freely
GB/IE/NI 21