Technical Data; Noise And Vibration Data - Parkside PTS 710 B2 Bedienungs- Und Sicherheitshinweise

˜ Technical data
Electric plunge
saw
Model number
Nominal output
Nominal voltage
Idle speed n/n
0
Max. cutting depth
Thread size
Protection class

Noise and vibration data

Noise measurement value determined in
accordance with EN 62841. The A-rated noise
level of the power tool is typically as follows:
Sound pressure level
Uncertainty
Sound power level
Uncertainty
m WARNING!
Wear ear muffs!
Vibration emission value
Cutting wood
Uncertainty
Cutting metal
Uncertainty
8 GB/IE/NI
PTS 710 B2
HG09158 VDE plug
HG09158-BS BS plug
710 W
230 V∼, 50 Hz
(Alternating current)
5500 min
–1
27 mm
M6
II / (double insulation)
L = 100 dB(A)
PA
K = 3 dB
PA
L = 111 dB(A)
WA
K = 3 dB
WA
a = 2.2 m/s
2
h,W
K = 1.5 m/s
2
a = 2,6 m/s
2
h,M
K = 1.5 m/s
2
NOTE
The declared vibration total values and
u
the declared noise emission values have
been measured in accordance with a
standard test method and may be used for
comparing one tool with another.
The declared total vibration values and the
u
declared noise emission values may also
be used for a preliminary assessment of
exposure.
WARNING!
m
The vibration and noise emissions during
u
actual use of the power tool can differ
from the declared values depending on the
manner in which the tool is used, especially
what kind of workpiece is processed.
Try to minimise exposure to vibration and
noise. Examples of measures to reduce
vibration include wearing gloves when
using the tool and limiting working time. All
parts of the operating cycle must be taken
into account (e.g. times when the power
tool is switched off and when it is running
idle in addition to the trigger time).