Operation - Endress+Hauser Easytemp TMR31 Bedienungsanleitung

16

5 Operation

The configuration of the compact thermometer is performed using the PC
®
software ReadWin 2000, which is available in the configuration kit as an
accessory (see page 17).
Settable parameters
Standard settings • Measuring unit (°C/°F)
• Measuring range limits
Advanced settings • Fault condition reaction
• Output (analog standard/inverse)
• Filter (0 ... 8 s)
• Offset (-9.9 to +9.9 K)
• Measurement point identification/Tag
Service functions • Simulation (on/off)
Detailed information about configuration using ReadWin
in the online documentation of the PC software.
-50 to 150 °C (-58 to 302 °F) without extension neck
-50 to 200 °C (-58 to 392 °F) with extension neck
®
2000 can be found