Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
All manuals and user guides at all-guides.com
Inserting the Nails
1. Unplug before inserting nails into the electric staple gun. Unlock the lock
piece (3) and lift it out of the unit.
2. The heads of the nails must be in the corresponding groove. Slide the
follower (4) back into the channel and lock the lock piece back in place.
Clearing Stoppages
1. Pull the power plug and remove all staples or nails, which are not jammed
in place, from the channel.
2. Pull the tin cover with safety tongue (5) off the unit to the front. Then you
can lift the mounting plate from its base and remove jammed nails or
staples from the unit. If necessary carefully use pliers.
Tin Cover
Operation
9
Mounting Plate
Werbung
Inhaltsverzeichnis
