Assembly - Bosch Rexroth SD301 Bedienungsanleitung

3 609 929 827/06.06 | SD301

4 Assembly

4 Assembly
4.1 Assembly of the display
holder
4.1.1 Standard display holder
The SD301 system display is attached to the
system boxes with the standard display hold-
er (scope of delivery).
To do so, the standard display holder is at-
tached with the mounting nuts provided
(Figure 1) and the SD301 is slid over it.
Figure 1: Assembly of the display holder
The system boxes of the first series do not
have these mounting nuts. Here, bore holes
(Ø 4.3 mm) can be made (Figure 2). Attach-
ment is then possible with the screws provid-
ed (M4 x 6). The additional M4 nuts needed
are not included in the scope of
delivery.
Bosch Rexroth AG
Figure 2:
When the display is attached, the user inter-
face should be vertical and the connection
cable underneath.
4.1.2 Universal display holder
The universal display holder, which is avail-
able as an accessory, provides other assem-
bly options for the SD301. It allows the
SD301 to be attached to system boxes with
non-standard locks (such as VW-E1), ma-
chine frames, or any surfaces.
It consists of a display holder (1), a spacer
(2), and a side plate (3) (Figure 3).
2
1
Figure 3:
19/76
Ø 4,3mm
3