Service And Support - Bosch Rexroth PRC7000 MGDM Betriebsanleitung

R911381901 | Rexroth PRC7000 MGDM
Service Germany
Service worldwide
Preparing information
Tab. 18: Electrical data
Power supply power Typ. 24 V DC
(US1)
Supply voltage for the
Via external 24 V DC power supply unit (PELV)
Logic
Nominal current Logic approx. 0,2 A (24 VDC without additional consumers
at the sensor or I/O interfaces)
Losses 5 W
Cable lengths Max. 30m
Wire size According to the M12 plug connectors manufacturer
specifications
Tab. 19: Mechanical data
Weight approx. 1 kg
Dimensions Refer to dimensioned drawings
Tightening torque M12 0,4 Nm
plug connector
Angle plug: plug direction is defined by coding
1)
Mechanical load at plug connectors too high!
Damages or tearing off of the M12 plug connectors!
Excessive tensile loads must be avoided and can cause individual

conductors at the plug or in the cable to tear off and thus lead to
function failure (refer to Fig.60 locations of connectors with angle
plugs).

25 Service and Support

Contact Service-Hotline and Service Helpdesk under:
Phone: +49 9352 40 5060
Fax: +49 9352 18 4941
E-Mail: service.svc@boschrexroth.de
Internet:http://www.boschrexroth.com
Additional information on service, repair (e.g. delivery addresses) and training can
be found on our internet sites.
Outside Germany, please contact your local service office first.
For hotline numbers, refer to the sales office addresses on the internet.
To be able to help you more quickly and efficiently, please have the following
information ready:
• Detailed description of malfunction and circumstances
• Type plate specifications of the affected products, in particular type codes and
serial numbers
• Your contact data (phone and fax number as well as your e-mail address)
Bosch Rexroth AG 115/118
refer to 1)
NOTICE