Auto Transition; Cut Transition - Panasonic AW-HS50E Bedienungsanleitung

1. Basic operations

1-1-7. Auto transition

When the AUTO button is pressed, the background
transition is executed automatically for the transition duration
which has been set.
When it is pressed while the slide lever is at a midway
setting, the transition is executed for the duration remaining
from the midway setting.
The transition duration can be set using the following menu
operation.
[1] TIME/CBGD Menu
1. AUTO Time
When the AUTO button is held down, the time setting is
displayed on the OSD menu so the setting can now be
changed while checking what is displayed.
The display unit of TIME/CBGD Menu can be changed using
the following menu operation.
[13] Operation Menu
6. Time Unit
Either seconds or frames can be selected as the display
unit.
Any time from "0f" to "999f" can be set when using frames
as the display unit. The time that can be set when using
seconds as the display unit differs depending on the video
format.
59.94i: max 33s09f 50p:
59.94p: max 16s39f 24PsF:
50i: max 39s24f 23.98PsF: max 41s15f
  Even when the "Key", "PinP" or "NoAsign" has been
selected as the setting of the slide lever function, the
background always serves as the target for executing
auto transitions.
max 19s49f
max 41s15f
6 (E)

1-1-8. Cut transition

When the CUT button is pressed, the background transition
is executed instantly.
  Even when the "Key", "PinP" or "NoAsign" has been
selected as the setting of the slide lever function, the
background always serves as the target for executing cut
transitions.