Saving Images In The Flash Memory - Panasonic AW-HS50E Bedienungsanleitung

1. Basic operations

1-9-2. Saving images in the flash memory

The data of the images stored in the frame memories can be
retained even when the unit's power is turned off by saving
it in the flash memory area which is incorporated inside the
unit.
Whether to automatically save the image data stored in the
frame memories or save it manually is set when the data is
to be transferred from the AUX bus.
[12] USER/FMEM Menu
7. FMEM Mode
M (Mode):
This is used to set the method of storing the image data
in the flash memory area.
Auto: The images are stored automatically.
Manu: The images are stored manually.
EX (Execute):
When the OSD/TIME dial is pressed, the image data in
the frame memory is stored in the flash memory area.
 This takes effect when "Manu" has been selecting as
the M (Mode) setting.
Note
When data is being written in the flash memory area, a
message that the writing is underway is displayed on the
OSD menu.
Do not turn off the power while this message is
displayed.
25 (E)