Operation - Westfalia 87 84 90 Originalanleitung

Replace the button cells if the readings become
weak. For replacing the button cells, open the battery
compartment (4) at the rear side and insert two button
cells of the type CR2032 with the +pole facing up into
the battery
ment. Close the battery
compartment with the
battery
cover.
2. Pull out the holder (5)
for table stand or fasten
the basis on a suitable
surface by using the
magnets (3).

Operation

1. Place the sensor T1 into the refrigerator
and the sensor T2 into the freezer com-
partment.
2. Hold the alarm button (h)
pressed for 2 seconds.
The value for the MAX
temperature
flashing.
3. Use the button [ + ] or [ - ]
to adjust the desired
MAX temperature.
4. Touch the alarm button (h) again. Now the value for
the MIN temperature will start flashing.
Operation
compart-
compartment
will start
5
h
g
14
3
4