Using A Vtr With The Dynamic Tracking™ Function; Editing With A Live Source From A Video Camera - Sony RM-450a Bedienungsanleitung

Using a VTR with the Dynamic Tracking™ Function

Editing with a Live Source from a Video Camera

Preparations
Video camera
This unit can control a VTR with the dynamic tracking™ function as a
player.
The operation is slightly different from the other types of VTR.
1
Shifting to the control mode to control a VTR with the dynamic
tracking function
Enter the IN and OUT points of the player at the same tape point.
You can control the VTR with the dynamic tracking function. The
point you entered as the IN/OUT points is regarded as the IN point.
2
Entering the edit points of the recorder
Enter the IN and OUT points of the recorder.
3
Determining the playback speed of the player
Select the playback speed of the player with the PLAYER search dial
in the shuttle mode.
The speed can be selected between the –1 to 3 times the normal speed.
(–1 to 2 times in the case of the "BETACAM" VTR)
The rest of the operation is the same as that of other VTRs.
You can change the determined speed after the IN point.
You can change the speed determined in Step 3 during editing after the
player passes the IN point.
Player
VIDEO IN
PB/EE
Recorder
RM-450A
27