Air Pressure Source; Supply Amount - Sony BL55-RU Bedienungsanleitung

3-5-2. Air Pressure Source

Whenever air is supplied to the scale from an air pressure source, the air should always pass through a filter
(5 µm), mist separator (0.3µm), and regulator to remove any dust, mist, and other foreign substances. Sufficient
care should be taken since foreign substances entering inside the scale can cause a breakdown of the scale.

3-5-3. Supply Amount

Air should be supplied to the scale at a pressure of 19.6 kPa per scale. Note that the pressure of the supply
section may be reduced due to the pipe length or layout even if the setting at the regulator is 19.6 kPa.
BL55-RU
IN
Filter
Mist
5 µm
separator
0.3 µm
Fig. 3-18
OUT
Regulator
3-13
(E)