4-3-1. Detailed Description of MODE Switches
A/B signal output types
MODE switches 1, 2, 4, 7, 9 and 10
These switches are not used. Always use in the OFF setting.
MODE switch 3 (Direction switch)
This switch is used to change the positional relationship between scale movement direction and A/B signal.
For more information, see section 4-4-1, "Changing the Direction."
MODE switch 5
This switch is not used. Always use in the ON setting.
MODE switch 6 (Resolution setting switch)
This switch is used to set the resolution. For output form F types, setting this switch to ON sets 0.1 µm and
setting to OFF sets 0.05 µm. For G types, setting to ON sets 0.02 µm and setting to OFF sets 0.01 µm.
MODE switch 8 (Alarm mode switch)
This switch is used to select the alarm output format.
For more information, see section 4-4-3, "Setting the Alarm Reset Mode."
Analog output types
For analog output type, always use in the OFF setting.
Analog output types do not have alarm output.
4-3
BL55-NE
(E)