3-4. Detector Head Mounting
1
Move the machine table and adjust the mounting position of the detector head to roughly the center of
the scale.
2
Use the supplied mounting screws to semi-tighten the detector head.
Scale
Detector head
3
Remove the stopper from the detector head.
3-8
(E)
Scale clamp
Reference
plate
Fig. 3-10
Stopper
Fig. 3-11
Detector head mounting screw
(M2.6 x 8 hex. socket-head cap screw)
Plain washer (nominal 2.6)
Scale
Detector head
BL55-NE