Westfalia 25 70 55 Bedienungsanleitung Seite 16

Changing the Fuse
If the fuse has been triggered, it must be replaced. A spare fuse is stored at
the underside if the unit.
1. Pull the power plug and disconnect the unit from a battery, if connected,
before changing the fuse.
2. Remove the blown fuse ("Fuse 10 A") and replace it with the spare fuse
("Spare Fuse").
3. Use pliers to pull out the fuse, but be careful not to crush the fuse.
Cleaning

Clean the charger only with a damp cloth and let it dry completely before
using it again.

Do not use aggressive or chemical cleaning agents.
Technical Data
Nominal Voltage ................................................. 230 V~ 50 Hz
Nominal Power ................................................... 70 W
Secondary Fuse ................................................. Automotive 10 A
Primary Fuse (internal) ....................................... 630 mA Surge-Proof
Minimum Capacity of the Battery ....................... 20 Ah
Dimensions W x H x D ....................................... 167 x 200 x 95 mm
Weight ................................................................ approx. 1.3 kg
Protection Class ................................................. II
Operation
12