Use And Operation - Klarstein 10013269 Bedienungsanleitung

EN
12

USE AND OPERATION

Remove the plastic protective wrapping for 3-in-1 filter pads (HEPA, active carbon and
PCO filters). After removing any plastic bags, reinstall the filters in accordance with the
instructions:
1
Open the filter cover.
Following the same method you can also replace the dirty filters.
Note: Do not try to wash the 3 in1 filter, it is not a reusable product. Filter located in
the cover can be cleaned with the vacuum cleaner and - if necessary - rinsed with
cold water.
To keep your unit operating at strong efficiency, the set of filter pads should be replaced
regularly. As usual, the filter can last from 6 months to 12 months under normal
conditions of use.
Replacement level
2
Carefully insert the filter.
Accepted level
3
Reinstall the filter cover.
Place the unit in a suitable
place and connect it to the
mains.
Better level