Control Panel; On/Off Button - Klarstein 10013269 Bedienungsanleitung

CONTROL PANEL

1

On/Off button

2 Timer button
• By pressing this button, the purifier can be timed to operate for intervals of
2 hours, 4 hours and 8 hours, stopping automatically when the selected
operating time has elapsed.
• Press this button (Timer) to select the required operating time. A warning
light automatically indicates the remaining operating time.
• To select the continuous operating mode, press the button repeatedly until
there are no more amber indicator lights lit up.
3 Speed button
• Low speed
• Mid speed
• High speed
To change this speed, press on the SPEED/On button again. The red warning
light indicates the selected speed. Note: We suggest to use high speed in
30 minutes for first time usage.
4 Ionizer and UV button
• 1st press: Ionizer and UV lamp on.
• 2nd press: Ionizer off and UV lamp on.
• 3rd press: Ionizer off and UV lamp off
• The default setting is Ionizer on and UV lamp is off. The purifier will be
come back to default setting after the above 3 press
Important note: When the unit is not in use, switch it off and unplug it.
EN
11