Inhaltsverzeichnis
Werbung
Maintenance and Cleaning
Maintenance and Cleaning
Check the steel cable regularly over complete length for damage and check
that the limit switch (N) is functioning correctly. Raise the cable winch until the
lift-off lever (L) activates the limit switch and lower it until the lever (K) acti-
vates the turn off switch.
If the steel cable is damaged, e.g. buckled or torn, have it replaced with a new
cable. Have the cable replaced by a specialist workshop. The switch-off
weight (J) must not be forgotten when fitting the new cable as this guarantees
correct operation of the limit switch.
Lubricate the pulley (H) regularly with a little oil.
Make sure the unit is always clean, dry and free from oil.
Only use a dry or slightly damp cloth to clean the machine. Do not use
aggressive cleaners or inflammable substances such as petrol, thinners,
turpentine etc. under any circumstances.
Pay attention that the ventilation slots are clean and unblocked at all times in
order to prevent the unit from overheating.
Before switching on check that all mechanical parts of the winch run easily.
11
Werbung
Inhaltsverzeichnis
