F) Selecting Tv Channels; G) Mute Function; H) Volume Control; I) Switching The Audio Format - Conrad 1280 Bedienungsanleitung

f) Selecting TV channels

You can enter the desired TV channel via the number buttons (channel 1 = press button "1" briefly and wait a second;
for channel 25 = press button "2" followed by button "5").
Or you can select a TV channel via the arrow buttons " " and " ".

g) Mute function

The button with the crossed out speaker symbol (A) mutes the audio output. Press the button again to return to the
previous volume.

h) Volume control

Use the arrow buttons " " and " " to control the volume (not possible within a menu or in the Setup).

i) Switching the audio format

The button (L) allows you to switch between mono and stereo (if supported by the currently selected channel).

j) Channel preview

Press this button (J) in TV mode to display the next 9 channels simultaneously (press again to view the 9 following
channels).
You can use the remote control to navigate to the channel on the screen you are interested in using the number
buttons on the remote control (e.g. the channel in the upper left corner with button "1", the one in the center with the
button "5" etc.).
Press ESC (D) to exit the function.

k) Sleep mode

Press the Sleep button (K) several times to select the time after which the TV-Box will switch off automatically (in 10-
minute intervals).
To deactivate the function, press "Sleep" repeatedly until the display disappears.
36