Before You Call For Service - LG VR64701LVMP Bedienungsanleitung

BEFORE YOU CALL FOR SERVICE

Confi rm before reporting the failure of Robot Cleaner.
Problem
The power supply cannot be
turned on.
The power supply
automatically turns off.
The Robot Cleaner will not
charge.
Suction power becomes weak.
Noise becomes louder.
The Robot Cleaner will not
activate.
The lower brush does not
rotate.
Movements or travel path are
abnormal.
The Robot Cleaner cannot
be activated with the remote
control.
38
Solutions (Reference page)
Check that the power switch is turned on. (Page 15)
This is not a failure. Robot Cleaner has its own power saving function.
If it is not used for ten minutes after the power supply is turned on,
the power will automatically turn off. (Page 17)
Check whether the main power switch is turned on.
Remove objects around the home station. (Page 15)
Confi rm that the power supply is connected to the home station.
(Page 14)
Wipe the charging terminals with a dry cloth.
Check whether there is foreign material blocking the suction port.
(Page 31)
Empty the dust bin. (Page 29)
Clean the dust bin fi lter. (Page 30)
Confi rm that the dust bin has been mounted properly.
Confi rm that the dust bin fi lter has been mounted properly.
(Page 30)
Check whether foreign material is caught in the brush. (Page 31)
Confi rm that the power switch is turned on. (Page 15)
Confi rm that the battery has been charged. (Page 18)
Clean the brush. (Page 31)
Confi rm that the brush has been mounted properly. (Page 31)
Carefully wipe the sensors with a dry soft cloth. (Page 32)
If the ultra microfi ber mop is attached, confi rm that it is mounted
properly. (Page 25)
Turn the main power switch off and on.
Replace the remote control batteries. (Page 12)
Confi rm that the control is within the coverage area of the main unit,
which is less than 3
Check whether the main power switch is turned on. (Page 15)
. (Page 12)