18 How To Charge The Battery; Automatic Charging; Manual Charging - LG VR64701LVMP Bedienungsanleitung

Automatic charging

The Robot Cleaner returns to the home station at the end of a cleaning
cycle or when its battery is running low.
※ If 10 minutes elapse without the Robot Cleaner moving or the battery
is too low, the power will be automatically turned OFF.
※ Do NOT turn OFF the Main Power Switch as the battery will not be
recharged. If the machine is returned manually with the Main Power
Switch OFF, it announces an error message, "Main power switch on the
back of the Robot Cleaner is turned off. Please turn the switch on."
※ In the event that the unit returns to the Home Station due to a low
battery during the cleaning, cleaning will be started, after recharging,
from the nearest place of the area which has not been cleaned before. (Page 18)
※ If Robot Cleaner is unable to dock to the home station on its fi rst attempt, it will try again until it docks
successfully.
※ When Robot Cleaner has completed all areas that it can clean, it will return to the home station even when
the battery level is not low.

Manual charging

You can manually charge the battery prior to using the Robot Cleaner for the fi rst time or to charge the
battery during cleaning.
※ If the Robot Cleaner did not start cleaning from the home station or if the Robot Cleaner is manually
charged by pressing the Home button, it may take slightly longer to fi nd the home station.
※ If the Robot Cleaner is within 10
Standby, it will automatically be returned to the home station and charging will begin.
Tip
Take the following precautions when using the home station:
• If foreign material is caught on the charging terminal, charging may not be activated. Wipe
the terminal from time to time with a dry cloth after the power plug is disconnected.(p32)
• To prevent electric shock or damage to the home station, do not touch the charging terminal
with any metallic objects.
• To avoid fire or electric shock, never disassemble or modify the home station.
• Do not to place the Robot cleaner, the home station or power plug near a heating source.
HOW TO CHARGE THE BATTERY
Method 1. Attach the Robot Cleaner to the home
Method 2. When the 'HOME' button of the remote
of the front of the charging terminal while the power is turned on from
station by aligning to the front side of the
home station. A melody sound will be
generated along with an audio message to
start charging.
※ If a voice message, "Main power switch
on the back of the Robot Cleaner is
turned off. Please turn the switch on." is
announced repeatedly, then turn on the
Main Power Switch.
control or the Robot Cleaner is pressed,
charging will be prompted by automatically
generating a searching signal and returning
the Robot Cleaner to the home station.
17