Cleaning the Polybag Vacuum Sealer
Before cleaning the unit, always pull the power plug.
Clean the housing with a lightly moistened cloth. Do not immerse the unit
into liquids. Do not use aggressive chemicals, solvents or abrasives.
In order to clean all parts of the unit thoroughly, you can remove the
silicone strip (17) and the polyfoam pad (15).
Pull out the silicone strip. Clean the silicone strip with a lightly moistened
cloth and insert the strip with the thin side first into the guide opening.
Press the silicone strip evenly into the opening.
When reinserting the silicone strip into the provided opening, make sure the
strip is dry, not damagend and placed correctly.
Pull the polyfoam pad carefully out of the adaptor plate. To clean the
polyfoam, use a moistened cloth and less soap. Carefully rub the foam to
remove dirt and allow to dry thoroughly. To reinsert the polyfoam pad into
the adaptor plate, evenly press it into the gap.
Replacement Bags and Bag Rolls
Suitable replacement bags can be ordered under article no. 72 64 48.
50 Pieces, Dimensions: 22 x 30 cm.
Suitable replacement bag rolls can be ordered untder article no. 87 76 96.
Operation
18