Oiler Setting
Hose up to 5 m
Hose up to 10 m
If you do not have an oiler at your disposal, please put a few drops of oil into the
compressed air connection before every machine usage. Lubricate the air tool
once more after use, especially if you do not operate the unit for a long time.
Further maintenance work is not necessary.
Suggested Components for safe Operation
1.
1. Compressed Air Metal Shears
2. Quick Coupling Adaptor
3. Pneumatic Pipe with Quick Couplers at both sides
4. Quick Coupling Adaptor
5. Quick Coupling
6. Valve
7. Oil-fog Lubricator
8. Pressure Regulator
9. Filter Unit
10. Air Source (Compressor)
Storing
Store the compressed air metal shears at a dry location that is protected from
dust and dirt between 10ºC and 30ºC.
Maintenance and Care
every 2 min.
once a min.
2.
3.
1 drop
1 drop
5.
4.
6.
13
7.
9.
8.
10.