Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Safety Notes
Do not use oxygen or flammable gases as source of energy. The air tool
should only be operated with clean, dry air with 6 bar (max. 8 bar). When using
higher pressure for operating the air tool, self life of the air tool will be
drastically reduced.
Disconnect the air tool from the compressed air source before carrying out any
maintenance work or before exchanging the blade.
Check if all connections and hoses are mechanically secured and if they are
functioning properly. Loose hoses may cause severe injuries. Only use safety
couplings.
Check the tool and accessory before use for damage and do not continue
using it in case of damage.
Avoid abnormal posture. Make sure you have a firm foothold and you always
hold the balance.
Be attentive! Pay attention to what you are doing. Approach your work with
circumspection.
Do not use the air tool when your reactivity is affected by alcohol consumption,
medication, drugs, illness or tiredness. One moment of abstraction operating
the unit can cause grave injuries.
Keep your work area clean. Disorder can cause accidents.
Take care of adequate lighting.
When cutting, never place the hand in front of the cutters.
Do not open the unit and do not try to repair it yourself. In case of questions or
problems please contact a professional or our customer service. Only use
original replacement parts.
9
Werbung
Inhaltsverzeichnis
