Remote Control - Klarstein 10021654 Bedienungsanleitung

How to change batteries in the remote control:
1. Flip the remote on its side.
2. Press the battery release on the bottom edge of the remote.
3. Grasp the battery socket and pull the battery out.
4. Replace battery with lithium battery CR2025. 4. Replace battery with lithium battery CR2025.
Technical details Technical details
1. Input voltage: AC 220-240 V
2. Frequency: 50/60 Hz
3. Consumption power: ≤40w
4. Noise level: ≤30dB
5. Negative ions: 3.0 million / cm' (10cm far from the wind exit)
6. Rate of absorbed CO2: ≥50% PPM
7. Applicable area: 30-40m
8. Remote control distance: ≤5m
9. Operating condition: Temperature—1O°C~55°C Humidity: ≤ 95°/ORH
10. Power of motor: ≤1,300 RPM

Remote Control

2
Installation of the Filter Installation of the Filter
10