Werbung
Commissioning
Setting up the unit
The mixing console is designed for desk mounting.
When choosing the installation point for your unit, make sure that
direct sunlight, vibration, dust, heat, cold and dampness are avoid-
ed. There must be no powerful transformers or motors in the vicinity
of the unit. These can cause interference.
Make sure the unit is set up on a stable base.
The mixing console may be operated only in dry rooms.
Because of the great variety of paints and polishes used for furniture,
a chemical reaction from the feet of the unit, which could leave visi-
ble residues on the furniture, cannot be ruled out. Therefore, the unit
should not be placed on the surface of valuable furniture without
suitable protection.
Do not drill any holes or place additional screws in the housing to
secure the unit, as this may damage the unit.
Connection
There are various ways in which the mixing console can be integrated into your
system. The connection layout shows one possibility.
Connection must always be performed by a specialist familiar with
the particular safety regulations and technical conditions. Note the
technical data of the mixing console when connecting.
38
63
Werbung
Kapitel
