Height Adjustment; Mounting The Rubber Lip - Westfalia WR 5610 Bedienungsanleitung

Height Adjustment

The garden vac can be set to two different suction head
heights.
1. Pull the spring-loaded wheel axle to the rear position
to set the suction head to "high". This position is
ideal for working on lawns and uneven surfaces.
2. Pull the spring-loaded wheel axle to the front position
to set the suction head to "low". The low position of
the suction head is ideal for cleaning paved surfaces
and areas such as patios, driveways and paths.

Mounting the Rubber Lip

Included in delivery you will find a rubber lip, a metal rail and five Phillips head
screws.
1. Place the metal rod in the suction
nozzle as shown and mark the
mounting holes with a pen or a sharp
object.
2. Drill five 2 mm holes in the plastic
material in the marked spots.
3. After that, you can attach the
rubber lip and the metal rail to the
unit with the Phillips head screws.
Assembly and Operation
12