Basic Playback; Starting Playback - JVC KV-DV7 Bedienungsanleitung

BASIC PLAYBACK

The following marks used in this manual indicate
the discs to be used.
DVD Video
POWER
POWER
7
5
H/P VOL
∞
H/P VOL
1
4
7
SHIFT
SHIFT (S)
S
Before performing any operations, make sure
the following....
• Check the connection with the TV and with the
car receiver.
• Turn on the TV and the receiver.
• Select this unit (auxiliary or external input) as
the playback source on the receiver.
• Select the correct input where this unit is
connected.
• For DVD playback, you can change the
Setup Menu setting to your preference. (See
pages 20 – 28.)
If " "appears on the screen when
pressing a button, the disc cannot accept an
operation you have tried to do.
6
Video CD Audio CD
8
SUBTITLE AUDIO ANGLE
DISPLAY
D
STEP
TIME
MENU
H/P VOL SETUP
ENTER TITLE
RETURN
H/P VOL
2 3
SLOW
5 6
ZOOM
REPEAT
8 9
A-B RPT
CLEAR
0 C M
SEARCH MODE

Starting playback

1
Press POWER
power.
POWER
STEP
2
Press OPEN on the unit.
The loading slot cover opens.
3
Disc loading lamp
DO NOT force the cover open by hand.
3
Insert a disc into the loading slot.
DO NOT insert a disc while the disc loading
lamp is flashing* or is not lit**.
* Flashing: while loading or ejecting a disc
** Not lit: when a disc has been loaded.
4
Close the slot cover by hand.
The disc type is automatically detected and
the detected disc lamp (DVD, VCD/CD)
lights up, and playback starts automatically.
• It takes a while to detect the disc type.
If a menu appears while playing a DVD or VCD
with PBC function, see "MENU-DRIVEN
PLAYBACK" on page 12.
to turn on the
The lamps on the buttons on
the unit light up.
OPEN
The unit draws in the disc
automatically.
• When the power is off, you
cannot insert a disc.
PHONES
Disc lamps
DVD / VIDEO CD / CD
DVD VCD/CD