Werbung
Operation
1. Plug the power plug of the soldering iron into a 230 V~ 50 Hz
wall socket. When not in use, place the soldering iron in the
provided holder (3).
2. The soldering iron heats up with approx. 30 W power.
3. Before first use, the soldering tip (9) must be tinned. Allow
some solder to melt on the hot soldering tip. Let it melt so a
thin film forms which covers the entire soldering tip.
4. After work, allow some solder to melt on the soldering tip to
protect it against corrosion while not using the soldering iron.
When using the soldering iron the next time use a damp
sponge to wipe off excess solder after heating up the soldering
tip.
Inserting/Replacing the Soldering Tip
Please note!
Always let the soldering iron cool down to room temperature
before touching the soldering tip or the heater – there is risk of
burns!
To remove the existing tip,
unscrew it from the tip holder.
Screw the new tip firmly into the
threaded tool holder. Do not
use tools.
Replace worn or burnt soldering
tips immediately to keep your
soldering iron in best condition.
Operation
10
Werbung
