EA01278D
7.3
Replacing the S-DAT Promass, t-mass, Prosonic Flow
Proceed as described in Section 7.1 → 7 and as illustrated in the graphics below.
Pull the S-DAT including the carrier board gently upwards. Use a screwdriver to carefully
release the securing tabs (A) of the carrier board and pry out the carrier board together with
the S-DAT. Do not damage or bend pins!
1 →
A
‣
Promass, t-mass
2
A
‣
Prosonic Flow
12
1.
1.
2.
2.
Endress+Hauser