Werbung
Verfügbare Sprachen
Verfügbare Sprachen
icon is always lit on the hob zone
display.
• Pots may not be placed on the operating
hob. >>> Check if there is a pot on the
hob zone.
• Your pot may not be induction suitable.
>>> Check if your cooker is suitable for
the induction hob.
• The pot may not be centred correctly on
the hob zone or the bottom surface of
the pan may not be wide enough for the
selected hob zone. >>> Center the hob
zone by choosing a pot that is wide
enough for the hob zone.
• The pot or hob zone may be too hot. >>>
Wait for them to cool down.
The selected hob zone suddenly turns off
while it is operating.
• The cooking time of the selected com-
partment may have expired. >>> You can
set a new cooking time or finish cooking.
• It has overheat protection. >>> Wait for
your hob to cool down.
• An object may have covered the touch
control panel. >>> Remove the object on
the panel.
Although the hob zone is turned on, the
pot does not heat up.
• The pot may not be suitable with the In-
duction hob. >>> Check if your cooker is
suitable for the induction hob.
• The pot may not be centred correctly on
the hob zone or the bottom surface of
the pan may not be wide enough for the
selected hob zone. >>> Center the hob
zone by choosing a pot that is wide
enough for the hob zone.
The cooling fan continues to run even
though the hob is turned off.
• This is not an error. The cooling fan con-
tinues to operate until the electronic
equipment in the hob falls to the appro-
priate temperature.
Noise from the hob during cooking
• Some sounds may be heard from the hob
while cooking. These sounds are due to
the composition of the cooking vessel.
These sounds are normal, they are not a
malfunction and they are a part of induc-
tion technology.
Possible noises and reasons
• Fan noise: The cooker is equipped with a
fan that activates automatically accord-
ing to the temperature of the appliance.
The fan has various operating levels and
operates at different levels as per the
temperature.
• Lower buzz like the operating noise of
a transformer: This is due to the nature
of the induction technology. As the heat
is transmitted directly to the base of the
cooking vessel, such buzz sounds may
be heard as per the material of the cook-
ing vessel. Thus, different noises may be
heard with different cookware.
• Cracking noise: The reason of this is the
structure and material of the base of the
cooking vessel. A cracking sound may be
heard if the cooking vessel is made of
various layers with different materials.
• Whining noise: A whining sound may be
heard when two cooking zones on the
same side of the cooker are used to cook
with different cooking levels.
EN / 29
EN
DE
FR
Werbung
