Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3. By touching the adjustment area or by
sliding your finger across the area, ad-
just the temperature level between 0
and 15.
ð You can change the temperature level
on the setting area of both cooking
zones.
Wide surface left cooking zones are
explained as an example. If there is
a wide surface cooking zone also
on the right-hand side of the hob,
the same instructions apply to the
said cooking zone.
Turning on the wide surface cooking zone
while one or both of the left cooking zones
are running (It varies depending on the
product model. It may not be available
on your product.)
ü While one or both of the left cooking
zones are running, you can combine
both cooking zones by activating the
wide surface cooking zone. Thus, you
can utilize a wider cooking zone just
with the same values.
1. Touch the wide surface cooking zone
selection key while one or both of the
left cooking zones is/are running.
ð The smaller one of the temperat-
ure values of the cooking zones
you have previously selected will
appear on the rear left cooking
zone display. If there is a timer dur-
ation given, the timer value of the
cooking zone with the lower value
will appear on the display.
2. To change the temperature value after-
wards, set the desired temperature on
the setting area of both cooking zones.
If you touch the wide surface zone
key while the wide surface cooking
zone is active, the cooking zones
will be separated and turn off.
Turning off the wide surface cooking zone
ü Wide surface cooking zone can be
turned off in 3 different ways:
1. By dropping the temperature to "0"
level: You can turn the wide surface
cooking zone off by dropping the tem-
perature level to "0".
2. By using the turn-off with the timer
option for the wide surface cooking
zone: When the time is over, the timer
will turn off the wide surface cooking
zone. 0 will appear on the left cooking
zone display and 00 will appear on the
timer display. The light of "
the rear left cooking zone display will go
off.
3. By touching the wide surface cook-
ing zone symbol for 3 seconds: If you
touch the wide surface cooking zone
symbol for 3 seconds, the cooking zone
is turned off.
"Autoflexi" mode (Enabling the automatic
wide surface cooking zone)
If the pot is placed on cooking zones as
shown below, "flexi" (wide surface cooking
zone) mode will be automatically enabled.
Touch "
" once to exit this mode.
EN / 19
EN
DE
FR
" key on
Werbung
