Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Inner cylinder filter • inner cylinder cap
Remove the inner cylinder filter.
Wash the inner cylinder filter and dust case with water.
Inner cylinder filter
Gently remove any attached dust and debris from the filters before washing them with water.
Note
Drain the water attached to the inner cylinder filter thoroughly after washing.
Air dry the filter.
After washing the filter, allow it to thoroughly air dry before you reassemble it.
Do not use it without drying. Doing so might clog the filters soon and cause weak suction power or
abnormal odor.
Also, do not dry it with hot air such as that from a hair dryer.
Doing so might cause a performance degrade, damage, or deformation.
Attach the inner cylinder filter.
Risk of damage to the vacuum cleaner
Attach the dust case and filters before operation.
CAUTION
If any dust and debris enters the motor, the filter inside the vacuum cleaner might be
clogged and strange sounds might come from the vacuum cleaner.
In this case, please consult a Hitachi authorized service agent.
Note
If the suction power is weak even after washing the filters with water, the clean filter, sponge filter,
etc. might be worn.
To request replacement, please contact a Hitachi authorized service agent.
EN-34
(P.EN-30)
→
(P.EN-30)
→
Dust case
Werbung
