Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Inner cylinder filter • inner cylinder cap
Open the dust case lid
Turn the
until it stop
Base of the inner cylinder cap
Remove dust and debris from the inner cylinder filter.
You can easily remove dust and debris caught in the inner cylinder
filter by sliding the maintenance brush in the direction indicated by the
arrow.
Attach the inner cylinder filter and close the dust case lid.
Inner cylinder fill in the center of the
dust case
Center
Inner cylinder
If the filter is not securely attached, it might fall when you empty the dust case. Similarly, if
Note
you use the vacuum cleaner without securely attaching the filter, strange sounds might
come from around the filter.
Attach the maintenance brush to the back side of the dust case.
Attach the maintenance brush
to the hook of the dust case.
If the maintenance brush is not securely attached to the back of the dust case, the brush
Note
might fall off when you use the vacuum cleaner. Securely attach the maintenance brush to
the back side of the dust case.
EN-30
(P.EN-28) and remove the inner cylinder filter.
→
mark on the cap Turn
Dust case
Inner cylinder
Dust case
Hook
Attach
Maintenance
brush
Lift the inner cylinder filter straight up.
Turn the
mark on the cap on the dust case
until you hear a "click" sound.
Dust case lid
Firmly attach the knob of the maintenance
brush until you hear a "click" sound.
Knob
Click
Note
Dust and debris
might spill when the
dust case is
removed. Remove
the dust case over a
newspaper, etc.
Inner cylinder filter
Maintenance brush
(P.EN-28)
→
Inner cylinder
Push
Werbung
