Viessmann Tecto FL2 Aida Bedienungsanleitung Seite 17

Note!
Do not attempt to remove any hard to remove dirt by scraping!
Scraping will damage the basin surface.
9. Wipe clean all interior surfaces. Use a squeegee of a dry soft, lint-free cloth to dry.
10. Replace the honeycomb, bottom plate and suction grid.
11. Wipe clean all exterior surfaces. Use a squeegee of a dry soft, lint-free cloth to dry.
12. If accessible, remove the front panel and vacuum the condenser fins behind the panel.
13. Connect the cabinet back to the mains and switch it on.
14. Wait until the cabinet has reached its operating temperature, and then replace all food products on the
shelves.
6.3. Opening front glass
Only SO-RG and BO-RG cabinets have a glass front that is designed to be opened.
Do not attempt to open the front glass of any other cabinet variant!
Note!
Do not overtighten the screws when closing the front glass!
Once you feel normal resistance, the screws are sufficiently tightened.
Note!
Do not open or close the front glass forcibly! Exerting force may damage the glass.
If the cabinet is not equipped with soft opening struts, support the glass when opening.
WARNING!
17
EN DE ES FR PL RU NL FI SV NO DA EE LT LV