Maintenance And Service; Maintenance And Cleaning; After-Sales Service And Application Service - Bosch GML SoundBoxx 14,4 V Professional Originalbetriebsanleitung

OBJ_BUCH-1777-001.book Page 14 Thursday, December 6, 2012 1:42 PM
14 | English
Cause Corrective Measure
Construction site radio inoperative on A/C power supply
Power-supply plug or Check the power-supply plug
connection cable defective and the connection cable,
and have them replaced as
required
Wrong power-supply plug Use the original Bosch power-
inserted supply plug (also available as
spare part)
Construction site radio inoperative on DC power supply
Battery contacts Clean the battery contacts
contaminated (e.g. by inserting and
removing the battery several
times) or replace the battery
Battery pack defective Replace the battery
Battery pack too warm or too Wait until of the battery has
cold reached operating tempera-
ture
Construction site radio suddenly inoperative
Power-supply plug or battery Plug in power-supply plug or
pack not properly or battery properly and
completely inserted completely
Bad radio reception
Interference from other Position the construction site
devices or insufficient set-up radio at another location with
location better reception or with
greater clearance to other
electronic devices or socket
outlets.
Time indication faulty
Back-up batteries of clock Replace back-up batteries
empty
Back-up batteries incorrectly Insert back-up batteries
inserted (wrong polarity) correctly
When the corrective measures do not eliminate an error,
please contact an authorised service agent for Bosch power
tools.

Maintenance and Service

Maintenance and Cleaning

For safe and proper working, always keep the construction
site radio clean.
Wipe off debris using a moist and soft cloth. Do not use any
cleaning agents or solvents.
If the construction site radio should fail despite the care taken
in manufacture and testing, repair should be carried out by an
authorised customer services agent for Bosch power tools.
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the type plate of
the construction site radio.

After-sales Service and Application Service

Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
1 619 929 L56 | (6.12.12)
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions
concerning our products and their accessories.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: (0844) 7360109
Fax: (0844) 7360146
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: (011) 6519600
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: (011) 4939375
Fax: (011) 4930126
E-Mail: bsctools@icon.co.za
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Pinetown
Tel.: (031) 7012120
Fax: (031) 7012446
E-Mail: bsc.dur@za.bosch.com
Bosch Power Tools