Before First Use - Viessmann Haus&Luft HL-OP-15 Benutzerhandbuch

1.
Front panel
2.
Prefilter
3.
HEPA filter (white)
4.
Activated carbon filter (black)
5.
Photocatalytic honeycomb filter
6.
Touch control panel
a.
"Function" button – select UV
lamp and ionizer function
b.
"Mode" button – select "Auto" or
"Silent" mode
c.
"Time" button – select timer
function
d.
"Reset" button
e.
"Speed" button – select air
filtering speed
f.
"Power" button – switch the air
APPLIANCE FEATURES
The air purifier is an appliance for end-to-end treatment of the indoor air you breathe. The air is
purified with a four-stage filter bank (comprising a prefilter, an HEPA filter and a activated carbon
filter, photocatalytic filter). Each of the three filter stages has a unique function. The air purifier also
includes a UV-C lamp and an air ionizer.
Prefilter: pre-filtering of air to remove dust, allergens and hair from the air.
HEPA filter: main filtering of air to remove remaining dust, pollens, allergens, mould spores
and smoke.
Activated carbon filter: filters out formaldehyde, benzene, harmful airborne gases and all
bad odours.
Photocatalytic filter – the titanium dioxide coat results, in the presence of ultraviolet light
from the UV lamps, in the photocatalysis to effectively remove any organic and chemical
contaminants
UV-C lamps: biological treatment of air by killing viruses, bacteria and microbes.
Ionizer: the ionizer generates negative ions to regulate the ionic balance of indoor air and
improve your well-being by generating the air present at natural locations, e.g. in a forest or
at the seaside.
TIMER: sets the time to stop the air purifier.
AUTO: the air purifier will automatically adjust the air filtering speed to the detected air quality.
„SILENT" function - reduce the fan rotational speed to provide discrete and quiet operation
Air quality LEDs: the air purifier continuously monitors and indicates the quality of indoor air.
REPLACE FILTER LED:: the air purifier monitors the filter status; this LED comes on when the
activated filter and the HEPA filter need replacement.

BEFORE FIRST USE

1. Unpack the air purifier, remove all plastic bags, inserts and safety locks and closures.
2. Verify that your power mains match the nameplate ratings of the air purifier.
purifier on/off
g.
"Time" LEDs
h.
Air purifier speed LEDs
i.
UV LED
j.
Ionizer LED
k.
"Auto" LED
l.
"Silent" LED
m.
Power on LED
n.
dark sensor
7.
Air exhaust grill
8.
Housing
9.
Air quality indicator
10. UV lamps (2x)
11. Handle
12. Air quality sensor access panel
15