Geberit KSS-160 Instandhaltungsanleitung Seite 43

4
Open the terminals (mains cable, heating
plate) on the printed circuit assembly
(flathead screwdriver no. 2).
5
Remove the cable from the clamps (long-
nose pliers).
6
Disconnect the sensor cable.
7
Remove the printed circuit assembly.
8
Loosen the screw (hexagon key size 5) and
remove the earthing.
10417165195 © 12-2022
971.328.00.0(00)
9
Loosen the screws (hexagon key size 5) and
remove the heating plate.
10
Remove the insulation.
11
Attach the insulation to the new heating
plate.
EN
43