Geberit KSS-160 Instandhaltungsanleitung Seite 39

3
Loosen the screws (Torx® profile T10) on
the printed circuit assembly.
4
Loosen the screws (Torx® profile T10) and
open the strain relief.
5
Open the terminals (mains cable, heating
plate) on the printed circuit assembly
(flathead screwdriver no. 2).
6
Remove the cable from the clamps (long-
nose pliers).
10417165195 © 12-2022
971.328.00.0(00)
7
Disconnect the sensor cable.
8
Remove the printed circuit assembly.
9
Loosen the screw (hexagon key size 5) and
remove the earthing.
10
Loosen the screws (hexagon key size 5) and
remove the heating plate.
11
Remove the housing.
EN
39