Control Panel And Display; One-Touch Beverage Buttons; Navigation Buttons; Menu Button - Philips Saeco INCANTO HD8921/01 Benutzerhandbuch

number of red squares

Control panel and display

One-touch beverage buttons

Navigation buttons

ESPRESSO button = Escape
ESPRESSO
button: press this button to return
to the main menu.
AROMA STRENGTH button = OK
AROMA STRENGTH
button: press this button to select,
confirm or stop a function.

MENU button

value to be set
1
2
3
4
4 Press the MENU button, select menu and scroll to select water hardness.
Select the preferred water hardness setting and press the OK button to
confirm.
This espresso machine has a self-explaining display for easy use. Read the
sections below for a quick explanation of the buttons.
Use the one-touch beverage buttons (ESPRESSO, ESPRESSO LUNGO,
CAPPUCCINO and LATTE MACCHIATO) to quickly prepare one of the preset
beverages.
- Make sure that the milk carafe is in place and prepared for use when you
select cappuccino or latte macchiato (see the separate quick start guide).
- If you want to stop the brewing process before the machine has finished
dispensing the preset coffee volume, press the OK button.
- You can adjust the length of espresso or espresso lungo (see 'Adjusting
coffee and milk volume').
- After preparing a milk-based beverage, the machine starts the QUICK
CARAFE CLEAN procedure.
Some of the one-touch beverage buttons have a double function; use these
buttons to navigate through the menu:
Use the MENU button to prepare other drinks, like hot water and frothed
milk. You can also use the MENU button to change the following settings:
- Display contrast
water hardness
very soft water
soft water
hard water
very hard water
CAPPUCCINO button = Up button:
CAPPUCCINO
press this button to scroll up
through the display menu.
MENU button = Down button:
MENU
press this button to scroll down
through the display menu.
English
9