Herunterladen Inhalt Inhalt Diese Seite drucken

Adjusting The Self-Propel Drive; Preparing The Battery Pack For Recycling; Storage - Toro Flex-Force Power System eRecycler eS52VST Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für Flex-Force Power System eRecycler eS52VST:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

Adjusting the Self-Propel
Drive
Whenever you install a new self-propel cable or if
the self-propel drive is out of adjustment, adjust the
self-propel drive cable.
1.
Loosen the cable-support nut
Figure 22
1. 25 to 38 mm (1 to 1-1/2
inches)
2. Self-propel-drive bar
3. Cable jacket
2.
Hold the self-propel-drive bar 25 to 38 mm (1 to
1-1/2 inches) from the handle
3.
Pull down the cable jacket (toward the machine)
until there is no slack in the cable
4.
Tighten the nut on the cable support.
5.
Release the self-propel-drive bar and ensure
that the cable is loose.
Note:
The cable must be loose with the
self-propel drive bar in the released position;
otherwise, the machine may creep when you
disengage the bar.
Preparing the Battery Pack
for Recycling
Important:
Upon removal, cover the terminals of
the battery pack with heavy-duty adhesive tape.
Do not attempt to destroy or disassemble the
battery pack or remove any of its components.
Contact your local municipality or your authorized Toro
distributor for more information on how to responsibly
recycle the battery.
(Figure
22).
g009692
4. Cable-support nut
5. Cable support
(Figure
22).
(Figure
22).

Storage

Important:
Store the machine, battery pack, and
charger only in temperatures that are within the
appropriate range; refer to
10).
Important:
If you are storing the battery pack
for the off-season, charge it until 2 or 3 LED
indicators turn green on the battery. Do not store
a fully charged or fully depleted battery. When
you are ready to use the machine again, charge
the battery pack until the left indicator light turns
green on the charger or all 4 LED indicators turn
green on the battery.
Disconnect the product from the power supply
(i.e., remove the battery pack and electric-start
button) and check for damage after use.
Do not store the machine or charger with the
battery pack installed.
Clean all foreign material from the product.
When not in use, store the machine, electric-start
button, battery pack, and battery charger out of the
reach of children.
Keep the machine, battery pack, and battery
charger away from corrosive agents, such as
garden chemicals and de-icing salts.
To reduce the risk of serious personal injury, do
not store the battery pack outside or in vehicles.
Store the machine, battery pack, and battery
charger in an enclosed clean, dry area.
21
Specifications (page

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

2185321853t

Inhaltsverzeichnis