Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Page EN-12
Operation
Operation
Before getting started
•
Read the chapter "Safety" on page EN-4.
•
Set up and connect the appliance as
described in the chapter "Start-up" on
page EN-24.
Switching the appliance off
and on
Switching off
(12)
1
2
3
Adjust
•
Press and hold the "Adjust" button (12)
for 5 seconds.
A beep sounds and the interior light (11)
goes out. The appliance is switched off.
Switching on
(12)
1
2
3
Adjust
•
Press and hold the "Adjust" button (12)
for 5 seconds.
A beep sounds. The interior light (11)
comes on.
The appliance is switched on.
If the appliance makes disturbing nois-
es after it is switched on, check that it
is in a stable position and correctly in-
stalled.
Smart
Super
4
5
Mode
Smart
Super
4
5
Mode
Setting the temperature
WARNING
Health hazard!
The appliance may not operate proper-
ly if exposed to low ambient tempera-
tures for extended periods of time. This
can then lead to an increase in temper-
ature in the fridge and freezer compart-
ment.
■ Always ensure the ambient tempera-
ture is kept within the specifi ed range
(see "Intended use" on page EN-4)
If you set a lower temperature, you will
require greater cooling power. This in-
creases energy consumption.
Setting the temperature in the
fridge
To check the refrigeration, you will need a re-
frigerator/freezer thermometer.
Place the refrigerator/freezer thermometer
•
in the fridge, on the glass shelf (7) above
the fruit/vegetable drawer (6); the ideal
temperature here is +6 °C.
•
in the freezer compartment; the ideal
storage temperature is –18 °C.
Setting the temperature manually
(12)
(13)
1
2
3
Adjust
•
Press the "Adjust" button (12) repeatedly
to set the refrigeration temperature.
The cooling power indicator (13) shows
the selected setting.
1
2
3
Adjust
– Only indicator 1 is illuminated:
lowest power setting.
Smart
Super
4
5
Mode
4
5
Mode
Werbung
Inhaltsverzeichnis
