Functioning Of The Spirodoc; Display; Switching On And Off The Spirodoc - MIR Spirodoc Bedienungsanleitung

Essential performances (according to IEC 60601-1:2005 +
A1:2012)
Emission limits
Electrostatic discharge protection
Magnetic field immunity
Radio Frequency Immunity
MIR will make available on request circuit diagrams, component part lists, descriptions, calibration instructions, or other
information that will assist service personnel to repair those part of the device that are designated by MIR as repairable by
service personnel.
2.

FUNCTIONING OF THE SPIRODOC

2.1

Display

The device does not have a keyboard. The touch screen type display allows access to all
functions by simply touching the display. The controls on the touch screen change
dynamically based on the functions performed.
To access a specific function touch the corresponding icon on the display.
To visualize the list of information scroll through the left part of the screen.
2.2

Switching on and off the Spirodoc

To turn on the Spirodoc press and release the power key placed in the middle on
the side of the device.
If the spirodoc is connected to USB or power supply is not possible to switched OFF
Upon turning on the device the very first image displayed refers to the manufacturer
including the date and time setting.
Without touching the display after a few seconds the device automatically moves on
to the main screen
By touching the icon different information is visualized according to which mode;
Doctor or Patient the device has been set to
SPIRODOC
EN IEC 60601-1-6: 2010+Amd2013
ISO 80601-2-61: 2017
IEC 60601-1-8: 2006
IEC 60601-1-11: 2015
Directive 2014-53-EU-RED
Error of displayed numeric value: Flow measurement percentage
error < ± 5%
Measure of the oximetry parameters with accuracy defined in table
on § 1.7.2
CISPR 11 Group 1 Class B
8kV contact, 15kV air
30 A/m
10V/m @ 80-2700 MHz
cod. 980156 Rev 4.2.1
spirodoc
User manual
EN 21/48