Warnings – Assembly text instructions – Maintenance
English
WARNINGS
General
•
Do not use any sharp tools to open the
packaging.
•
We strongly advise against using power tools.
•
Tripping hazard, mind your step.
•
Do not put out cigarettes on the shade.
•
Not grafitti proof.
•
Do not leave children unattended whilst playing
underneath the shade.
•
Colors can differ over years and from batch to batch.
Product
•
Do not drag the shade, but carry it with minimum
2 people.
•
Anchoring the product has to be done by
qualified people.
•
For anchoring: use suitable bolts or screws from
a specialized store depending on the material
your terrace is made of.
•
In case of strong winds or if it is not being used,
close the shade and tilt the latches downwards.
Put the protective cover over the shade to prevent
it from blowing open or getting dirty.
•
For ventilation purposes, the cover is not 100%
water proof.
•
Store the parasol when not in use for a long
time as follows: completely dry and in a dry
environment.
•
Do not leave the parasol closed for a long time
when the parasol fabric is still damp or wet.
•
Do not leave the shade unattended when opened.
•
Tests in a windtunnel have shown that the shade
withstands wind speeds up to 49 km/h (31 mph).
Still, we strongly advise to close it sooner (from
wind speed 28 km/h (18 mph) is the rule of
thumb.
•
We advise to position the shade in the direction
of the wind, put the arm in a 5° à 10° angle.
•
Fix the closed Sensu with the supplied strap.
Powder coating
•
White powder coating requires more
maintenance.
•
Do not use abrasive scouring powders or
scourers as they will scratch the surface.
•
Color can fade to some extent when exposed to
UV.
36
•
Flame retarding - NEN-EN13501-1 A2-sl -
Satisfying the same criteria as Class B for the
SBI-test according to EN13823. In addition,
under conditions of a fully developed fire these
products will nog significantly contribute to the
fire load and fire growth.
•
Dark colors can get very hot in sunny weather.
Acrylic fabric
•
White fabric requires more maintenance.
•
Shake or brush off loose dirt immediately.
•
Do not use any aggressive detergents as they will
remove the protective coating of the fabric.
•
We strongly advise you not to use a high-pressure
hose for cleaning.
•
UV colour fasteness: 7/8 (ISO 105-B02).
ASSEMBLY INSTRUCTIONS
With wheel base - p8
1. Fix the wheels to the bottom of the base using 4
bolts M6x12 each.
2. Put two large and seven small concrete tiles per
corner on the base.
3. Fix the rotating system to the base and fix with 4
bolts M10x16.
4. Position the large cover plate on top of the base.
5. Take the included parasol support out of the pole.
6. Position the parasol support on top of the rotating
system. Make sure that the cutout is positioned
with the rotating pin as shown in the drawing.
7. Now position the small cover plate on top.
8. The tilted side of the parasol support is back side
of the shade. Attention: make sure the shade is
tilted backwards as shown in the drawing.
9. Now slide the parasol pole on top of the parasol
support as shown in the drawing.
10. Tighten the two adjusting screws on the back of
the pole.
Moving up / down - p26
1. Use the handle to move the shade up / down.
2. Move all the way up until it can't move any further.
3. Fix the handle.
Open / close - p28
1. Open the shade by pulling the outer balleens.
2. Now fix the shade by connecting the two balleens
with the hook.
3. Put the Sensu in a tilted position for water
drainage & wind advantage.